HP P9000 for Compatible FlashCopy Mirroring User Guide (AV400-96388, October 2011)

Table 38 Parameters for the ICKDSF command (FLASHCPY WITHDRAW)
DescriptionValueParameter
Specifies the JCL statement identifying the volume. If
the OS of the host server is MVS, this parameter or
the UNITADDRESS parameter is required.
JCL statementDDNAME or DNAME
Specifies the SYSNAME in the ASSGN system control
statement. If the OS of the host server is VSE, this
parameter is required.
SYSNAMESYSNAME
Specifies the device number (device address) of the
S-VOL on which you want to perform the FLASHCPY
Source device numberUNITADDRESS, UNITADDR, or UNIT
WITHDRAW command. If the OS of the host server
is MVS, this parameter or the DDNAME parameter is
required.
Specifies the CU number, LDEV number, and device
number (device address) of the T-VOL on which you
CU number LDEV
number Target device
number
TARGETVOL or TGTVOL
want to perform the FLASHCPY WITHDRAW
command. This parameter is required.
Executes the background copying operation on the
relationship which has a copy source in the volume
COPYMODE
specified in the DDNAME, SYSNAME, or
UNITADDRESS. If YES is specified for
CHANGERECORDING when creating the relationship,
the relationship will be maintained after the
background copying process is completed. If NO or
nothing is specified for CHANGERECORDING when
creating the relationship, the relationship will be
deleted after the background copying process is
completed.
Deletes the relationship between volumes specified in
the TARGETVOL and DDNAME, SYSNAME, or
NOCOPY
UNITADDRESS without executing the background
copying operation. The default setting of this
parameter is NOCOPY.
Executes the background copying operation on all the
relationships that have copy sources in the volume
ALL
specified in DDNAME, SYSNAME, or UNITADDRESS.
If YES is specified for the CHANGERECORDING when
creating the relationship, the relationship will be
maintained even after the background copying process
completes. If NO or nothing is specified for the
CHANGERECORDING when creating the relationship,
the relationship will be deleted after the background
copying process is completed. The relationships that
have copy targets in the volume specified in
DDNAME, SYSNAME or UNITADDRESS will be
deleted without the background copying process.
Permits to execute the writing operation on the T-VOL
that is write-protected. The relationship will not be
deleted.
-RESETTGTWRTINHIBIT,
RESETTGTWRTINHB, or RTWI
Specifies the CU number, the LDEV number, or the
device number of the S-VOL when you use the Remote
FlashCopy function.
CU number
LDEV number
Source device number
SOURCEVOL or SRCVOL
If T-VOL is TSE-VOL, the physical capacity of the
allocated TSE-VOL is released.
-RELATSPACE
*
*
Valid in Compatible FlashCopy SE.
72 Performing Compatible FlashCopy operations