HP P9000 for Compatible FlashCopy Mirroring User Guide (AV400-96388, October 2011)

Example 34 FLASHCPY QUERY command execution result
FLASHCOPY VOLUME CAPABILITY INFORMATION TABLE
MAXIMUM MAXIMUM
EXISTING ALLOWED RELATIONS
RELATIONS RELATIONS EXCEEDED CAPABILITY
--------- --------- --------- ----------
1 1000 NO SRC CAP
TGT CAP
CAPABILITY LEGEND
ASY P-VOL = ASYCHRONOUS PPRC REMOTE COPY PRIMARY
CC SRC = CONCURENT COPY SOURCE
INACCESS = VOLUME INACCESSIBLE, DATA NOT OBTAINABLE
INHIBIT = FLASHCOPY INHIBITED O. THIS VOLUME
MAX EXCD = MAXIMUM RELATIONS EXCEEDED AT VOLUME OR ESS LEVEL
NEITHER = VOLUME NEITHER FC SOURCE NOR FC TARGET CAPABLE
PPRC PRI = PPRC PRIMARY
PPRC SEC = PPRC SECONDARY
PHASE 1 = PHASE 1 (VERSION 1) RELATIONSHIP EXISTS O. VOLUME
SRC CAP = FLASHCOPY SOURCE CAPABLE
TGT CAP = FLASHCOPY TARGET CAPABLE
XRC SRC = XRC SOURCE
The following table describes the meaning of information displayed as a result of executing the
FLASHCPY QUERY command.
Table 45 Information displayed by the FLASHCPY QUERY command
MeaningDisplayed contentDisplayed item
Displays the number of relationships in the specified volumes.Number of
relationships
EXISTING
RELATIONS
Displays the maximum number of relationships that can be created in the
specified volumes.
Number of
relationships
MAXIMUM
ALLOWED
RELATIONS
The number of relationships in the specified volume does not reach the maximum
number of relationships that can be created in the specified volume.
NOMAXIMUM
RELATIONS
EXCEEDED
The maximum number of relationships that can be created in the specified
volume is already created.
YES(VOL)
The maximum number of the relationships that can be created in the storage
system is already created.
YES(ESS)
The specified volume can be specified as the S-VOL of the Compatible
FlashCopy.
SRC CAPCAPABILITY
The specified volume can be specified as the T-VOL of the Compatible
FlashCopy.
TGT CAP
The specified volume cannot be specified as the S-VOL or T-VOL of the
Compatible FlashCopy.
NEITHER
The specified volume is the copy source volume of Continuous Access
Synchronous Z.
PPRCOPY PRI
The specified volume is the copy target volume of Continuous Access
Synchronous Z.
PPRCOPY SEC
The specified volume is the copy source volume of the Concurrent Copy.CC SRC
The specified volume cannot be used by Compatible FlashCopy.INHIBIT
The maximum number of relationships that can be created in the specified
volume is already created.
MAX EXCD
Viewing information of Compatible FlashCopy relationship 79