HP P9000 Provisioning for Mainframe Systems User Guide (AV400-96369, October 2011)

DescriptionItem
Total capacity of the selected pool-VOLs.Total Selected Capacity
Specify the pool name.Pool Name
• Prefix: Type the alphanumeric characters that will be the fixed characters at
the beginning of the pool name. The characters are case-sensitive.
• Initial Number: Type the initial number (up to 9 digits) that will follow the
prefix name.
• You can enter up to 32 characters including the initial number.
The next available number is automatically entered as a default. No number
appears if no pool identifier is available.
Initial Pool ID
Set the subscription limit of the pool, from 0 to 65534 (%).Subscription Limit
If blank, the subscription is set to unlimited.
The subscription limit is the ratio (%) of the V-VOL capacity that can be configured
to the total capacity of the pool volume. You cannot configure the V-VOL capacity
to exceed the subscription limit. For example, if the pool volume capacity is 100
GB and the subscription limit is 150%, you can configure up to 150 GB of the
capacity of V-VOL.
For Thin Provisioning Z, set the threshold between 1 and 100%. The default is
70%.
Warning Threshold
Set the threshold between 1 and 100%. The default is 80%.Depletion Threshold
Tier management settings.Tier Management
If Thin Provisioning Z is used, this item cannot be specified.
Monitoring Mode
If Thin Provisioning Z is used, this item cannot be specified.Buffer Space for New page
assignment
If Thin Provisioning Z is used, this item cannot be specified.Buffer Space for Tier Relocation
When you click Add, the configured information is added to the Selected Pools
table.
.Add
158 Thin Provisioning Z GUI reference