HP P9000 Provisioning for Mainframe Systems User Guide (AV400-96369, October 2011)

DescriptionItem
GB and the subscription limit is 150%, you can configure up to 150 GB of the
capacity of V-VOL.
Check Pool Name, and then type the pool name.Pool Name
• Prefix: Type the alphanumeric characters that will be the fixed characters at
the beginning of the pool name. The characters are case-sensitive.
• Initial Number: Type the initial number (up to 9 digits) that will follow the
prefix name.*
• Enter up to the 32 characters including the initial number.
*When a pool is selected, the pool name appears in Prefix by default. When
multiple pools are selected, the initial number is incremented, from the set number
to the maximum number, and is automatically set.
For example:
• When 1 is set in the Initial Number field, number 1 to 9 is automatically given
to the pool name.
• When 08 is set in the Initial Number field, number 08 to 99 is automatically
given to the pool name.
• When 098 is set in the Initial Number field, number 098 to 999 is
automatically given to the pool name.
You cannot set this item if the result of the following calculation exceeds 95:Warning Threshold
(used-pool-capacity/pool-capacity) * 100 (%)
Check Depletion Threshold, and then type a threshold value in percent. The
minimum threshold is the pool usage rate plus 1%. The maximum threshold is
100%.
Depletion Threshold
CAUTION: If you want to change multiple parameters for a pool two or more times, wait until
the current task finishes, and then change the next settings. If you attempt to change settings before
the current task finishes, only the settings in the next task will be applied, so the result might be
different from what you expected.
If only one user-defined threshold is set for the pool, the system threshold (fixed at 80%) is enabled.
When the Edit Pools window opens on the pool to which the system threshold is enabled, the lower
value of the user-defined threshold or the system threshold is assigned to the Warning Threshold
and the other value is assigned to the Depletion Threshold. In this case, the system threshold text
box is blank. Additionally, if the system threshold is enabled for the pool, if either one of the two
thresholds is changed, the unchanged threshold is defined as follows:
• If you change Warning Threshold, the higher value of the user-defined threshold or the system
threshold (fixed at 80%) is defined as Depletion Threshold.
• If you change Depletion Threshold, the lower value of the user-defined threshold or the system
threshold (fixed at 80%) is defined as Warning Threshold.
In this case, note that the reported SIM code number changes when the pool usage capacity
exceeds the threshold. If the threshold changes once, the system threshold is not enabled again.
Confirm window
Confirm proposed settings, name the task, and then click Apply. The task will be added to the
execution queue.
Edit Pools wizard 167