HP P9000 Provisioning for Mainframe Systems User Guide (AV400-96369, October 2011)

3. Click More Actions, and then select Edit Pools.
4. In the Edit Pools window, check Subscription Limit, and then type the subscription limit
percentage.
If the subscription limit is blank, then it is disabled, and any amount of THP V-VOLs can be
created regardless of the pool free capacity.
5. Click Finish.
6. In the Confirm window, confirm the settings, in Task Name type a unique name for this task
or accept the default, and then click Apply.
If Go to tasks window for status is checked, the Tasks window opens.
Working with SIMs
About SIMs
Thin Provisioning Z provide Service Information Messages (SIMs) to report the status of the THP
V-VOLs and pools. The SIM level is Moderate. If an event associated with a pool occurs, a SIM is
output to Remote Web Console to alert the user, and an SNMP trap is reported to the open-systems
host.
An example of a SIM condition is if the actual pool usage rate is 50.1%, but only 50% appears
on in Remote Web Console because the capacity amount is truncated after the decimal point. If
the threshold is set to 50%, a SIM and an SNMP trap are reported, even though the pool usage
rate appearing in Remote Web Console does not indicate the threshold is exceeded.
SIM reference codes
The following table provides information about SIM reference codes associated with Thin
Provisioning Z.
Types of reportsThresholds or ValuesEventCodes (XXX =
hexidecimal
pool number)
Information to the
operator
Completion
report to Remote
Web Console
Report to the
host
NoYesYes1% to 100% (in 1%
increments).
Pool usage level
exceeded the
Warning Threshold
620XXX
Default: 70%
NoYesYes100%Pool is full622XXX
YesNoYesNot applicable.Error occurred in the
pool
623XXX
YesYesYesNot applicable.No space in the
shared memory
624XXX
NoYesYesHighest pool
threshold.
Pool usage level
continues to exceed
625000
the highest pool
threshold. SOM 734
must be enabled.
NoYesYes1% to 100% (in 1%
increments).
Pool usage level
exceeded the
Depletion Threshold
626XXX
Default: 80%
60 Configuring thin provisioning