HP P9000 Provisioning for Mainframe Systems User Guide (AV400-96369, October 2011)

Types of reportsThresholds or ValuesEventCodes (XXX =
hexidecimal
pool number)
Information to the
operator
Completion
report to Remote
Web Console
Report to the
host
YesNoYesNot applicablePool-VOL is blocked627XXX
YesNoNoNot applicableV-VOL management
area cannot be saved
to a pool
640XXX
Automatic completion of a SIM
Some SIMs are completed automatically when you resolve the problem that caused the SIM.SOM
734 must be enabled for automatic completion of a SIM. Automatic completion of a SIM removes
it from the system with no additional manual intervention. After the SIM is automatically completed,
the status of the SIM changes to completed in Remote Web Console in the Confirm window.
The following SIMs occur when the usage level of the pool exceeds the threshold. They are
automatically completed when you resolve the problem causing the SIM.
• SIMs 620XXX, , 625000, and 626XXX are automatically completed if you increase pool
capacity by adding pool-VOLs because the condition that caused the SIM removed.
• SIMs are automatically completed in the following cases:
SIM 620XXX
In the pool of the pool number XXX, if the THP pool usage level falls below both of two
effective thresholds.
◦
◦ SIM 625000
In all pools in the storage system, if every THP pool's usage level falls below their depletion
thresholds.
◦ SIM 626XXX
In the pool of the pool number XXX, if the THP pool usage level falls below both of the
Warning and Depletion thresholds.
Manually completing a SIM
Some SIMs must be manually completed to clear them from the system.
After the trouble that caused the SIM is solved, you can manually complete the SIM. After manually
completing a SIM, the status of the SIM changes to completed. If you complete the SIM before the
underlying cause is solved, the SIM may reoccur.
1. Change the status of the pool whose usage level exceeds the threshold to normal. For
information about the solutions when the pool usage level exceeds the threshold, see
“Troubleshooting Thin Provisioning Z” (page 70).
2. In the Remote Web Console main window, in the Storage Systems tree, select Pool.
The pool name appears below Pool.
3. Click More Actions, and then select Complete SIMs.
OR
From Pool in the Actions menu, select Complete SIMs.
The Complete SIMs window opens.
Working with SIMs 61