HP P9000 Snapshot User Guide (AV400-96394, October 2011)

Table 21 RAID Manager error codes for SSB1: B901, B9A8, B9A9, B9AD, B9AE (continued)
Cause of ErrorRAID Manager
Command
SSB2
Since you specified Continuous Access Synchronous P-VOL as the Snapshot
S-VOL, the pair cannot be created.
paircreate9747
Since you specified Continuous Access Synchronous S-VOL as the Snapshot
S-VOL, the pair cannot be created.
paircreate9748
Since you specified Continuous Access Journal data volume or journal volume
in the intermediate site of 3DC cascading configuration as the Snapshot S-VOL,
the Snapshot pair cannot be created.
paircreate9749
Since you specified Continuous Access Journal P-VOL as the Snapshot S-VOL,
the pair cannot be created.
paircreate974a
Since you specified Continuous Access Journal S-VOL as the Snapshot S-VOL,
the pair cannot be created.
paircreate974b
Since you specified Continuous Access Journal journal volume as the Snapshot
S-VOL, the pair cannot be created.
paircreate974c
Since the volume you specified as the S-VOL has an S-VOL Disable attribute, the
command ends abnormally.
All commands974f
Since you specified the volume with the VMA setting as the Snapshot S-VOL, the
pair cannot be created.
paircreate9750
Since the Max LBA size of the volumes you specified as the Snapshot P-VOL and
S-VOL is different, the command ends abnormally.
paircreate, pairsplit,
pairresync, pairresync
-restore
9752
Since the number of slots of the volumes you specified as the Snapshot P-VOL
and S-VOL is different, the command ends abnormally.
paircreate, pairsplit,
pairresync, pairresync
-restore
9753
Since you specified the Thin Provisioning V-VOL as the Snapshot S-VOL, the pair
cannot be created.
paircreate9754
Since you specified the Business Copy reserved volume as the Snapshot P-VOL,
the command ends abnormally.
All commands9756
Since you specified the Auto LUN source volume as the Snapshot P-VOL, the
command ends abnormally.
All commands9757
For information about using Auto LUN, contact HP Technical Support.
Since you specified the Auto LUN target volume as the Snapshot P-VOL, the
command ends abnormally.
All commands9758
For information about using Auto LUN, contact HP Technical Support.
Since you specified the Auto LUN reserved volume as the Snapshot P-VOL, the
command ends abnormally.
All commands9759
For information about using Auto LUN, contact HP Technical Support.
Since you specified the Business Copy P-VOL as the Snapshot S-VOL, the
command ends abnormally.
All commands975a
Since you specified the Business Copy S-VOL as the Snapshot S-VOL, the
command ends abnormally.
All commands975b
Since you specified the Business Copy reserved volume as the Snapshot S-VOL,
the command ends abnormally.
All commands975c
Since you specified the Auto LUN source volume as the Snapshot S-VOL, the
command ends abnormally.
All commands975d
For information about using Auto LUN, contact HP Technical Support.
50 Troubleshooting