HP P9000 Snapshot User Guide (AV400-96394, October 2011)

DescriptionItem
The pools in the storage system display with the following icons:Tree
• : disk subsystem (storage system)
• Pool:X : pool in normal status (X indicates pool ID)
• Pool:X : pool whose usage rate exceeds the threshold (X indicates pool ID)
• Pool:X : blocked pool (X indicates pool ID)
The content of the main list is either data pools or pair volumes. This depends on whether
Subsystem or a Pool is selected in the tree.
Pool/volume list
If Subsystem is selected, all pools in the storage system display in pool/volume list with the
following fields:
• Pool ID: pool ID
• Capacity(GB): storage capacity of the pool
• Used Capacity(GB): capacity of the pool that is used by the Snapshot pairs
• Usage rate: usage rate of the pool
• Pool-VOL(s): total number of the pool-VOLs in the pool
If a Pool is selected, the Snapshot pairs that use the pool display in the pool/volume list, with
the following fields:
• P-VOL: port ID, the group number of host group, and LUN (LDKC number, CU number, and
LDEV number of the volume) of the P-VOL
For P-VOL LUs with more than one path, only one path is listed. The path is connected to the
first port within the ports configured to a path that are shown in the tree view of the Pair
Operation Window.
• MU: Snapshot ID
• Status: status of the Snapshot pair
66 Snapshot GUI reference