HP P9000 Snapshot User Guide (AV400-96394, October 2011)

DescriptionItem
Normal: The pool is in a normal status.
Warning: The pool-VOL in the pool is blocked.
Exceeded Threshold: The used capacity of the pool exceeds the pool threshold.
Shrinking: Reducing the pool-VOL.
Blocked: The pool is full, or an error occurred in the pool, therefore the pool
is blocked. If the pool is in both Warning and Blocked status, only Blocked is
displayed.
Shows the number of pool-VOL.Number of Pool VOLs
Shows the number of V-VOLs associated with the pool.Number of V-VOLs
For a snapshot pool, a hyphen (-) is displayed.
Shows the RAID level. If multiple RAID levels exist in a pool, this field indicates
that RAID levels are mixed.
RAID Level
Shows the information about the pool capacity.Capacity
• Total: Total capacity of pool.
Using Option button, you can select unit of capacity.
- One block means 512 bytes and one page means 42 megabytes in pool
capacity of Thin Provisioning or Smart Tiers.
- One block means 512 bytes and one page means 256 kilobytes in pool
capacity of Snapshot.
• Used: Used pool capacity.
• Used (%): Pool usage rates to pool capacity.
•
For a Thin Provisioning pool, Smart Tiers pool, and a Snapshot pool, a hyphen
(-) is displayed when you change the unit of capacity to Cylinder using Option
button.
Information about pool threshold is displayed.User-Defined Threshold(%)
• Warning: Warning threshold is displayed.
• Depletion: Depletion threshold is displayed.
For a snapshot pool, a hyphen (-) is displayed for Depletion.
Shows the information about subscription of the pool.Subscription
• Current: Current subscription.
• Limit: Subscription limit.
For a snapshot pool, a hyphen (-) is displayed for Current or Limit.
Shows the pool type.Pool Type
• For Thin Provisioning or Smart Tiers:
THP is displayed.
• For Snapshot:
Snapshot is displayed.
Shows the hard disk drive type and rpm of the pool. If multiple drive types or
rpms exist in a pool, this field indicates that drive types or rpms are mixed.
Drive Type/RPM
Shows whether Smart Tiers is enabled or disabled. If it is enabled Auto or Manual
is displayed. If it is disabled, a hyphen (-) is displayed.
Tier Management
For a Snapshot pool, a hyphen (-) is displayed.
70 Snapshot GUI reference