HP P9000 Snapshot User Guide (AV400-96394, October 2011)

DescriptionItem
Warning Threshold
• For Thin Provisioning and Smart Tiers:
Check Warning Threshold and enter a threshold. The minimum threshold is
the pool usage rate plus 1%. The maximum threshold is 100%.
• For Snapshot:
Check Warning Threshold and enter a threshold. The minimum threshold is
the pool usage rate plus 1%. The maximum threshold is 95%.
Check Depletion Threshold and enter a threshold. The minimum threshold is the
pool usage rate plus 1 percent. The maximum threshold is 100 percent.
Depletion Threshold
When creating a Snapshot pool, this setting is not necessary.
Confirm window
Selected Pools table
DescriptionItem
Shows the nickname and ID of the pool.Pool Name (ID)
If multiple RAID levels exist in a pool, this field indicates that RAID levels are
mixed.
RAID Level
Shows the pool capacity.Capacity
Shows the pool type.Pool Type
• For Thin Provisioning or Smart Tiers:
THP is displayed.
• For Snapshot:
Snapshot is displayed.
Shows the hard disk drive type and rpm.Drive Type/RPM
84 Snapshot GUI reference