HP XP P9000 Business Copy User Guide (AV400-96573, July 2013)
Table Of Contents
- HP XP P9000 Business Copy User Guide
- Contents
- 1 Business Copy overview
- 2 Requirements and planning
- 3 Sharing Business Copy volumes
- Cache Residency
- Fast Snap and Snapshot
- Data Retention
- Thin Provisioning and Smart Tiers
- External Storage Access Manager
- LUN Manager
- Open Volume Management
- Resource Partition
- Continuous Access Synchronous
- Continuous Access Journal
- External Storage
- Auto LUN
- 4 Performing configuration operations
- 5 Performing pair operations
- 6 Monitoring and maintaining the system
- 7 Troubleshooting
- 8 Support and other resources
- A Interface support for BC operations and options
- B Business Copy GUI reference
- Replications window
- Local Replications window
- View Pair Properties window
- View Pair Synchronous Rate window
- View Histories window
- Consistency Group Properties window
- Create Pairs wizard
- Split Pairs wizard
- Resync Pairs wizard
- Suspend Pairs window
- Delete Pairs window
- Edit Mirror Units dialog box
- Change Options dialog box
- Add Reserve Volumes Wizard
- Remove Reserve Volumes window
- Edit Local Replica Option wizard
- C Configuration operations (secondary window)
- D Pair operations (secondary window)
- E Monitoring and maintaining the system (secondary window)
- F Business Copy GUI reference (secondary window)
- Glossary
- Index
3. From the volume list, complete the following:
1. Select and right-click the volume or pair whose information you want to see.
2. From the menu, select Detail.
The Detail dialog box opens.
Field descriptions are provided in the following table.
DescriptionField
Volume ID: Shows LUN information using LDKC number:CU number:LDEV number format.P-VOL Information
CLPR: Shows CLPR number:CLPR name.
Shows the volume’s emulation type, capacity, and number of blocks.Volume Information
Pair Information
• P-VOL: Shows LUN information using LDKC number:CU number:LDEV number format.
• S-VOL: Shows LUN information using LDKC number:CU number:LDEV number format.
• MU: The pair’s MU number (mirror unit number).
• Status: The status of the pair.
• Sync: Percentage that P-VOL and S-VOL are synchronized.
• CTG: The consistency group number shows if the pair is registered in the group. If the pair
is not registered to the consistency group, dashes (---) are shown.
• CLPR(P): The identifier for the P-VOL’s cache logical partition (CLPR) shows in CLPR
number:CLPR name format.
• CLPR(S): The identifier for the S-VOL’s cache logical partition (CLPR) shows in CLPR
number:CLPR name format.
• Svol Mode: Indicates whether the S-VOL has been written to and whether it can be read.
For more information about Svol Mode, see “Volume list” (page 134).
• Copy Pace: Indicates the speed that data is copied according to the pair status. For more
information about Copy Pace, see “Volume list” (page 134).
If you select the check box, the information shown in the Pair Operation window is updated
after the Detail dialog box closes. If you do not select the check box, the information in the
Pair Operation window is the same before and after you close the Detail dialog box.
Refresh the window
after this dialog box is
closed.
Reviewing S-VOL path information
You can view path information for the S-VOL. You do this in the S-VOL Path dialog box.
1. In RWC, click Actions > Local Replications > BC/SS > Pair Operation.
Monitoring the system (secondary window) 127