HP XP P9000 RAID Manager Installation and Configuration User Guide (T1610-96046, August 2012)

The following values are defined in the HORCM_INST parameter:
• dev_group: The server name described in dev_group of HORC_DEV.
• ip_address: The network address of the specified remote server.
• service: The port name assigned to the HORCM communication path (registered in the
/etc/services file). If a port number is specified instead of a port name, the port number is
used.
When HORCM has two or more network addresses on different subnets for communication, the
ip_address of HORCM_MON must be NONE. This configuration for multiple networks can be
found using raidqry -r <group> command option on each host. The current network address of
HORCM can be changed using horcctl -NC <group> on each host.
Figure 14 Configuration for multiple networks
For example:
# horcctl -ND -g IP46G
Current network address = 158.214.135.106,services = 50060# horcctl -NC -g IP46G
Changed network address(158.214.135.106,50060 -> fe80::39e7:7667:9897:2142,50060)
For IPv6 only, the configuration must be defined as HORCM/IPv6.
Sample configuration definition files 61