HP XP P9000 RAID Manager Installation and Configuration User Guide (T1610-96046, August 2012)

For Solaris operations with RAID Manager version 01-09-03/04 and higher, the command device
does not need to be labeled during format command.
• AIX:
HORCM_CMD of HOSTA(/etc/horcm.conf) ... /dev/rhdiskXX HORCM_CMD of
HOSTB(/etc/horcm.conf) ... /dev/rhdiskXX HORCM_CMD of HOSTB(/etc/horcm0.conf)...
/dev/rhdiskXX
where XX = device number assigned by AIX
• Tru64 UNIX:
HORCM_CMD of HOSTA(/etc/horcm.conf) ... /dev/rrzbXXc HORCM_CMD of
HOSTB(/etc/horcm.conf) ... /dev/rrzbXXc HORCM_CMD of HOSTB(/etc/horcm0.conf)...
/dev/rrzbXXc
where XX = device number assigned by Tru64 UNIX
• DYNIX/ptx:
HORCM_CMD of HOSTA(/etc/horcm.conf) ... /dev/rdsk/sdXX HORCM_CMD of
HOSTB(/etc/horcm.conf) ... /dev/rdsk/sdXX HORCM_CMD of HOSTB(/etc/horcm0.conf)...
/dev/rdsk/sdXX
where XX = device number assigned by DYNIX/ptx
• Windows 2008/2003/2000:
HORCM_CMD of HOSTA(/etc/horcm.conf) ... \\.\CMD-Ser#-ldev#-Port# HORCM_CMD of
HOSTB(/etc/horcm.conf) ... \\.\CMD-Ser#-ldev#-Port# HORCM_CMD of HOSTB(/etc/horcm0.conf)
... \\.\CMD-Ser#-ldev#-Port#
• Windows NT:
HORCM_CMD of HOSTA(/etc/horcm.conf) ... \\.\CMD-Ser#-ldev#-Port# HORCM_CMD of
HOSTB(/etc/horcm.conf) ... \\.\CMD-Ser#-ldev#-Port# HORCM_CMD of HOSTB(/etc/horcm0.conf)
... \\.\CMD-Ser#-ldev#-Port#
• Linux, z/Linux:
HORCM_CMD of HOSTA(/etc/horcm.conf) ... /dev/sdX HORCM_CMD of
HOSTB(/etc/horcm.conf) ... /dev/sdX HORCM_CMD of HOSTB(/etc/horcm0.conf) ... /dev/sdX
where X = device number assigned by Linux, z/Linux
• IRIX:
HORCM_CMD for HOSTA (/etc/horcm.conf) ... /dev/rdsk/dks0d0l1vol or
/dev/rdsk/node_wwn/lun1vol/c0p0
HORCM_CMD for HOSTB (/etc/horcm.conf) ... /dev/rdsk/dks1d0l1vol or
/dev/rdsk/node_wwn/lun1vol/c1p0
HORCM_CMD for HOSTB (/etc/horcm0.conf)... /dev/rdsk/dks1d0l1vol or
/dev/rdsk/node_wwn/lun1vol/c1p0
Examples of RAID Manager configurations 81