HP XP P9000 Smart Manager for Mainframe Messages (TB589-96003, July 2013)

Explanation and recommended actionsMessage textMessage ID
An abnormal user termination was detected during the REXX service
processing.
command
Issued CLI command name
rexx-service
Name of the REXX service where the abnormal user termination
was detected
uuuu (decimal number)
User completion code
For details, see the MVS System Codes.
rrrr (hexadecimal number)
Reason code
command detected the user abend
during rexx-service processing.
(code=uuuu, reason=rrrr)
YKZ333E TSO RC=64
Invalid parameters are specified.Supplied parameters invalid.YKZ340T TSO RC=48
Nothing is assigned to the DEVN parameter.
No DEVN() supplied.YKZ341E TSO RC=48
The value specified in the DEVN parameter is invalid.
DEVN() value invalid.YKZ343E TSO RC=48
Invalid parameters have been specified.
Invalid parameters have been spe-
cified.
YKZ350T TSO RC=16
No error code has been specified.No error code has been specified.YKZ351E TSO RC=16
The specified error code is invalid. A possible cause is as follows:
• The specified value is not a four-digit hexadecimal value.
The specified error code is invalid.YKZ352E TSO RC=16
The load module cannot be found. Possible causes are as follows:
• The library dataset has not been concatenated.
• The module is protected by the RACF program control function.
Load module is not found.YKZ353E TSO RC=64
A description for the specified error code was not found.
For details on error codes, see XXX. If the error code is not listed in the
manual, contact your HP Technical Support or authorized service
provider.
A description for the specified error
code was not found.
YKZ354I TSO RC=8
A dynamic change in an I/O configuration definition was detected
during processing of the command.
Check the status of the device targeted by the command, correct any
errors related to the configuration or execution conditions, and then
re-execute the command.
device#
Device number being processed when a dynamic change was
detected in an I/O configuration definition
A dynamic configuration change was
detected during specified command
processing. DEVN device#
YKZ370E MSG
SC=32 RC=32
The KTENV command terminated.
return-code
Return code issued by the KTENV command
KTENV command return code=re-
turn-code.
YKZ371I TSO
Messages194