Hitachi Dynamic Link Manager Software Users Guide for Windows (7.6)

Performing a New Installation of HDLM on Windows Server 2008 and
Windows Server 2012
Note:
If you are running a Server Core environment in Windows Server 2008 or
Windows Server 2012, perform an unattended installation to install HDLM.
In a Non-Cluster Environment
Before installing HDLM, have a license key ready.
If you want to perform an unattended installation, also be sure to prepare an
installation-information settings file.
To install HDLM in a non-cluster environment:
1. Log on to Windows as a member of the Administrators group.
2. Save the license key file directly under the Windows installation-
destination drive. Also, instead of using the license key file, you can
directly specify a license key during the installation of HDLM.
installation-drive:\hdlm_license
The license key file will be deleted after the installation finishes.
3. Perform the installation.
¢
If you are not performing an unattended installation, insert the DVD
into the drive.
In the displayed window, click the Install button next to for
Windows of Hitachi Dynamic Link Manager Software.
If no window is displayed, manually run the installer (setup.exe).
The program checks whether HDLM has already been installed. If the
KAPL09173-W message appears, perform the procedure shown in
Upgrade Installation or Re-installation of HDLM on page 3-64. If a
message does not appear, go to the next step.
¢
If you are performing an unattended installation, execute the
installhdlm utility.
From the command prompt, execute the following command:
drive-containing-the-inserted-installation-DVD:\HDLM_Windows
\DLMTools\installhdlm -f installation-information-settings-
file
This command checks whether HDLM has already been installed. If
the KAPL09183-I message appears, a re-installation will be
performed.
If you specified n for the restart key in the installation-information
settings file, go to step 8.
If you specified y for the restart key in the installation-information
settings file, go to step 18.
3-52
Creating an HDLM Environment
Hitachi Dynamic Link Manager User Guide for Windows
®