Hitachi Dynamic Link Manager Software Users Guide for Windows (7.6)

ManualsBrandsHP ManualsComputer AccessoriesHP XP P9500 Storage DKC Module-1 Controller Upgrade Base Rack

Document organization

The following table provides an overview of the contents and organization of

this document. Click the chapter title in the left column to go to that chapter.

The first page of each chapter provides links to the sections in that chapter.

Chapter/Appendix Description

Chapter 1, Overview of HDLM on

page 1-1

Describes an overview of HDLM, and its features.

Chapter 2, HDLM Functions on

page 2-1

Describes the system configuration of HDLM, and the

basic terms and functions for HDLM.

Chapter 3, Creating an HDLM

Environment on page 3-1

Describes the necessary preparations for installing

HDLM, and then describes how to install HDLM and set

up the various functions.

Chapter 4, HDLM Operation on

page 4-1

Describes how to use HDLM by using both the HDLM

GUI and commands, and how to manually start and

stop the HDLM manager. This chapter also describes

how to configure an environment to properly operate

HDLM, such as changing the HDLM management-

target devices that connect paths or replacing the

hardware that makes up a path. Chapter 4 also

describes how to check path information by using the

Windows management tool.

Chapter 5, Troubleshooting on

page 5-1

Describes how to troubleshoot a path error, HDLM

failure, or any other problems that you might

encounter.

Chapter 6, Command Reference

on page 6-1

Describes all the HDLM commands.

Chapter 7, Utility Reference on

page 7-1

Describes the HDLM utilities.

Chapter 8, Messages on page

8-1

Describes information for all the possible messages

that could be output by HDLM. The chapter also

explains what to do in response to each message.

Appendix A, Functional

Differences Between Versions of

HDLM on page A-1

Describes the differences between HDLM versions.