Hitachi Dynamic Link Manager Software Users Guide for Windows (7.6)

The paths to be placed offline can be specified by using an HBA port, CHA
port, single path, or HBA port WWN. For details on how to specify paths,
see offline (Places Paths Offline) on page 6-6.
For example, if you want to place all the paths that pass through a
specific HBA port offline, execute the dlnkmgr command's offline
operation with the -hba parameter specified. The following shows an
example of executing this command:
PROMPT>dlnkmgr offline -hba 1.1
KAPL01055-I All the paths which pass the specified HBA port will
be changed to the Offline(C) status. Is this OK? [y/n]:y
KAPL01056-I If you are sure that there would be no problem when
all the paths which pass the specified HBA are placed in the
Offline(C) status, enter y. Otherwise, enter n. [y/n]:y
KAPL01061-I 3 path(s) were successfully placed Offline(C); 0
path(s) were not. Operation name = offline
PROMPT>
3. Check to see if the statuses of all the applicable paths have changed.
The following example shows how to execute the command:
dlnkmgr view -path
Viewing LU Information
This section explains how to display LU information by using an HDLM
command.
To display LU information, execute the dlnkmgr command's view operation
with the -lu parameter specified. The following shows an example in which
the command is executed:
PROMPT>dlnkmgr view -lu
Product : 9500V
SerialNumber : 3679
LUs : 3
iLU HDevName PathID Status
0110 G 000002 Online
000008 Online
0111 F 000001 Online
000007 Online
0112 E 000000 Online
000006 Online
Product : 9970/9980
SerialNumber : 15001
LUs : 3
iLU HDevName PathID Status
0580 J 000005 Online
000011 Online
0585 I 000004 Online
000010 Online
058A H 000003 Online
HDLM Operation
4-7
Hitachi Dynamic Link Manager User Guide for Windows
®