Hitachi Dynamic Link Manager Software Users Guide for Windows (7.6)

• The number of trace files
• Number of times the same path can be used for load balancing
• Number of times the same path can be used for extended load balancing
For details on how to set up each function, see
set (Sets Up the Operating
Environment) on page 6-16.
For example, to set up the error log collection level, execute the dlnkmgr
command's set operation with the -ellv parameter specified. When the
confirmation message is displayed, enter y to execute, or n to cancel the
command.
The following shows an example in which the command is executed:
PROMPT>dlnkmgr set -ellv 1
KAPL01049-I Would you like to execute the operation? Operation name
= set [y/n]: y
KAPL01001-I The HDLM command completed normally. Operation name =
set, completion time = yyyy/mm/dd hh:mm:ss
PROMPT>
To check whether the settings have been applied, perform the procedure
described in
Viewing the Operating Environment on page 4-8.
Viewing License Information
This section explains how to display license information.
To display license information, execute the dlnkmgr command's view
operation with the -sys and -lic parameters specified.
The following shows an example in which the command is executed.
PROMPT>dlnkmgr view -sys -lic
License Type Expiration
Permanent -
KAPL01001-I The HDLM command completed normally. Operation name =
view, completion time = yyyy/mm/dd hh:mm:ss
PROMPT>
For details on the displayed items and their descriptions, see
view (Displays
Information) on page 6-32.
Updating the License
This section explains how to update the license.
To update the license, execute the dlnkmgr command's set operation with
the -lic parameter specified. When the confirmation message is displayed,
enter y to execute, or n to cancel the command. If the license key file does
not exist, a message asking you to enter the license key appears, so enter
the license key.
Note:
4-10
HDLM Operation
Hitachi Dynamic Link Manager User Guide for Windows
®