Hitachi Dynamic Link Manager Software Users Guide for Windows (7.6)

-lic
Specify this option for when a license is updated. The HDLM license is
provided via a license key or license key file. A license key file is a file
that stores the HDLM license key.
If you use a license key file:
Store the license key file named hdlm_license directly under the
Windows installation drive, and then execute the set -lic operation.
A message confirming that the license key has been registered is
displayed, depending on the license key type defined in the license
key file. When a temporary license key or emergency license key has
been registered, the expiration period is displayed (KAPL01071-I,
KAPL01072-I).
If you do not use a license key file:
When the set -lic operation is executed, a message (KAPL01068-I)
asking the user to enter a license key appears. Enter the license key.
A message confirming that the license key has been registered is
displayed, depending on the license key type described in the license
key file. For a temporary license key or emergency license key, the
expiration period is also displayed (KAPL01071-I, KAPL01072-I).
The following table lists and describes the license key types.
Table 6-6 License Key Types
Type Description
Permanent license key Permanent license keys are valid for using HDLM permanently.
Temporary license key
#
Temporary license keys are used temporarily, for example,
when a user needs to perform product evaluations. Temporary
license keys are valid for 120 days after the installation. You
cannot reuse a temporary license key.
Emergency license key Emergency license keys are used temporarily, for example,
when waiting for a permanent license key to be issued.
Emergency license keys are valid for 30 days after they are
entered. You cannot reuse an emergency license key.
#
A temporary license key cannot be installed by using the dlnkmgr set
operation.
Example 1
The following example shows how to update the license key when the
license key file exists:
PROMPT>dlnkmgr set -lic
KAPL01049-I Would you like to execute the operation?
Operation name = set [y/n]: y
KAPL01071-I A permanent license was installed.
PROMPT>
Example 2
Command Reference
6-27
Hitachi Dynamic Link Manager User Guide for Windows
®