Hitachi Dynamic Link Manager Software Users Guide for Windows (7.6)

Parameters
This section describes the parameters for the view operation, in the following
order:
Parameters Used When Displaying Program Information on page 6-34
Parameters Used When Displaying HDLM Management-target Device
Information on page 6-40
Parameters Used When Displaying Path Information on page 6-42
Parameters Used When Displaying LU Information on page 6-57
Parameter Used When Displaying the Format of the view Operation on page
6-71
Parameters Used When Displaying Program Information
-sys [-sfunc|-msrv|-adrv|-pdrv|-lic|-audlog|-lbpathusetimes|-
expathusetimes]
Displays the HDLM program information.
Use one of the sub-parameters (following -sys) to specify the program
information that you want to display. If you do not specify a sub-
parameter, the command displays all of the program information except
the information about the audit log data collection settings, the number of
times the same path can be used for load balancing, and the number of
times the same path can be used for extended load balancing.
Table 6-10 Displayed Program Information on page 6-34 describes the
specifiable parameters, displayed information, displayed items, and a
corresponding description.
-t
Does not display the title for each information item.
Table 6-10 Displayed Program Information
Parameter and
program
information to
be displayed
Item Description
-sfunc
Information
about the HDLM
function settings
HDLM Version
HDLM version number
Service Pack
Version
HDLM SP version number. This item is blank if no
SP is present.
Load Balance
Settings for load balancing
• Setting status:
on: Enabled
off: Disabled
• Algorithm:
6-34
Command Reference
Hitachi Dynamic Link Manager User Guide for Windows
®