Hitachi Dynamic Link Manager Software Users Guide for Windows (7.6)

PROMPT>dlnkmgr view -sys -pdrv
HDLM Driver Ver WakeupTime
Alive x.x.x-xx yyyy/mm/dd hh:mm:ss
KAPL01001-I The HDLM command completed normally. Operation name
= view, completion time = yyyy/mm/dd hh:mm:ss
PROMPT>
Example 5
The following example shows how to display information about the HDLM
license:
PROMPT>dlnkmgr view -sys -lic
License Type Expiration
Permanent -
KAPL01001-I The HDLM command completed normally. Operation name
= view, completion time = yyyy/mm/dd hh:mm:ss
PROMPT>
Example 6
The following example shows how to display information about the audit
log settings:
PROMPT>dlnkmgr view -sys -audlog
Audit Log : off
Audit Log Category : -
KAPL01001-I The HDLM command completed normally. Operation name
= view, completion time = yyyy/mm/dd hh:mm:ss
PROMPT>
Example 7
The following example shows how to display the number of times the
same path can be used for load balancing:
PROMPT>dlnkmgr view -sys -lbpathusetimes
Times Same Path Was Used : 1
KAPL01001-I The HDLM command completed normally. Operation name
= view, completion time = yyyy/mm/dd hh:mm:ss
PROMPT>
Example 8
The following example shows how to display the number of times the
same path can be used for extended load balancing:
PROMPT>dlnkmgr view -sys -expathusetimes
Times Same ExPath Was Used : 100
KAPL01001-I The HDLM command completed normally. Operation name
= view, completion time = yyyy/mm/dd hh:mm:ss
PROMPT>
Parameters Used When Displaying HDLM Management-target Device
Information
-stinfo
6-40
Command Reference
Hitachi Dynamic Link Manager User Guide for Windows
®