Hitachi Dynamic Link Manager Software Users Guide for Windows (7.6)

Displayed Item
Description
No
summary
displayed
Summary
displayed
parameter or when you specify hbaportwwn for the -item
parameter.
Note that a hyphen (-) is displayed in the following cases:
• When using the EMC DMX, EMC CX, or HP EVA series
• When using iSCSI interfaces
Physical-
DskName
- When a path is migrated using a virtual ID, displays the name
of the storage system that is connected by the migration-
destination path.
A storage system name consists of the following three
elements, separated by periods:
• Vendor ID: The name of the storage system vendor.
• Product ID: Indicates the storage system product ID,
emulation type, or model ID.
For more details, see
Table 6-15 Product ID Displayed by
the View -path Operation on page 6-55.
• Serial number: For Virtual Storage Platform series the
serial number of the storage system.
When a virtual ID is not used, a hyphen (-) is displayed.
Physical-
iLU
- When a path is migrated using a virtual ID, displays LU
number in the storage system that is connected by the
migration-destination path.
• For HUS VM indicated by a hexadecimal number. The first
two characters of iLU are the CU number, and the last two
characters are the internal LU number within the CU.
• For Hitachi Virtual Storage Platform, indicated by a
hexadecimal number. The first two characters of iLU are
the number of the logical DKC (Disk Controller), the
middle two numbers are the CU number, and the last two
characters are the internal LU number within the CU.
When a virtual ID is not used, a hyphen (-) is displayed.
Physical-
ChaPort
- When a path is migrated using a virtual ID, displays port
number of the CHA that is connected by the migration-
destination path.
When a virtual ID is not used, a hyphen (-) is displayed.
Legend:
- : Not displayed
#1
The path information is displayed only when a value is specified for the -
path -item parameter.
#2
6-54
Command Reference
Hitachi Dynamic Link Manager User Guide for Windows
®