Hitachi Dynamic Link Manager Software Users Guide for Windows (7.6)

Table 6-16 Items That Can Be Added by Using the -lu -item
Parameter and Sub-parameters
Item that can be added Sub-parameter
SLPR slpr
PathName pn
ChaPort cp
CLPR clpr
Type type
IO-Count ic
IO-Errors ie
DNum dnu
IEP iep
DPC
dpc
Physical-Product vid
Physical-SerialNumber vid
Physical-iLU vid
Physical-ChaPort vid
Org-Product ha
Org-SerialNumber ha
Org-iLU ha
HaStat hastat
All items are displayed
all
In the sub-parameters, -hdev or -pathid, you can filter the LU
information to be displayed. If you omit both parameters, the command
displays the information about all the LUs recognized by HDLM.
For details on the contents of each displayed item, see Table 6-18
Displayed LU Information on page 6-65.
The sub-parameters are:
-hdev
host-device-name
Displays information only for the paths accessing the specified host
device.
Specify a drive letter to indicate the desired host device. You cannot
specify the host device unless a drive letter has been assigned. The
host-device-name string is case sensitive. If the command ends with
the KAPL01064-W or KAPL01013-E message, follow the recommended
action in the message.
-pathid AutoPATH_ID
6-60
Command Reference
Hitachi Dynamic Link Manager User Guide for Windows
®