Hitachi Dynamic Link Manager Software Users Guide for Windows (7.6)

Use this parameter to display only the information about the LU that
is connected to the path with that specified AutoPATH_ID.
-exlu
• When an HDLM management-target device is the EMC DMX series,
EMC CX series, or HP EVA series:
If this parameter is specified, all 32 digits of the iLU are displayed
instead of truncating the iLU to 13 digits. If this parameter is not
specified, any characters after the 13
th
digit of the iLU of the EMC
DMX series, EMC CX series, and HP EVA series will not be
displayed. Ellipsis (...) will be displayed instead.
• When an HDLM management-target device is only the Thunder
9500V series, Lightning 9900 series, Lightning 9900V series,
Hitachi USP series, Hitachi AMS2000/AMS/WMS/SMS series,
HUS100 series, Universal Storage Platform V/VM series, or Virtual
Storage Platform series:
16 digits or less are displayed for the iLU even if this parameter is
specified.
-t
Omits the title for each information item.
Example 1:
The following example shows how to add SLPR, PathName, ChaPort,
CLPR, Type IO-Count, IO-Errors, DNum, and IEP to the displayed
items for LU information.
Example 2:
When using Hitachi AMS2000 series, Hitachi SMS series , or HUS100
series storage and displaying LU information with DPC added to the
display items:
PROMPT>dlnkmgr view -lu -item dpc
Product : HUS100
Command Reference
6-61
Hitachi Dynamic Link Manager User Guide for Windows
®