Hitachi Dynamic Link Manager Software Users Guide for Windows (7.6)

Displayed item
Description
No
summary
displayed
Summary
displayed
however, that the displayed drive letter is the drive
letter for one of the Devs included in the LU.
DPC
- The setting information about the dynamic I/O path
control function is displayed for each LU.
on: The dynamic I/O path control function is
enabled.
off: The dynamic I/O path control function is
disabled.
-: The dynamic I/O path control function is not
supported.
PathID
- The AutoPATH_ID.
AutoPATH_ID is assigned every time the host is
restarted.
PathName
#1
- The path name. When you modify the system
configuration or replace a hardware item, you should
check the path names to identify the path that will
be affected by the change. Path name consists of the
following four elements, separated by periods:
• Host port number (hexadecimal number)
• Bus number (hexadecimal number)
• Target ID (hexadecimal number)
• Host LU number (hexadecimal number)
For details about each element of the path name and
its representation in Windows, see
Table 6-14
Elements of a Path Name on page 6-55
ChaPort
#1
- • For the Thunder 9500V series, Lightning 9900
series, Lightning 9900V series, Hitachi USP
series, Hitachi AMS2000/AMS/WMS/SMS series,
HUS100 series, Universal Storage Platform V/VM
series, and Virtual Storage Platform series:
Port number of the channel adapter, which
identifies the CHA port that is mounted on the
storage system.
You can identify an actual CHA port by
referencing this number from the storage
system management program.
• For the EMC DMX series, EMC CX series, and HP
EVA series:
A hyphen (-) is displayed.
CLPR
#1
- The number of the CLPR to which the CHA port
belongs, indicated by a number from 0 to 31. Note
that a hyphen (-) is displayed if the following items
are subject to display:
Command Reference
6-67
Hitachi Dynamic Link Manager User Guide for Windows
®