Hitachi Dynamic Link Manager Software Users Guide for Windows (7.6)

Folder that stores collected
files
#1
Files Explanation
folder-to-which-
collected-information-is-
output\hbsainfo
All files under
hbsainfo
#11
Error information of a Hitachi
Command Suite product other
than HDLM
folder-to-which-
collected-information-is-
output\%SystemDrive%
hdlminst.log
HDLM installation log
#1
The target error information collection folder is created in the folder to
which collected information is output. The user specifies the folder to
which collected information is output when executing the DLMgetras
utility. If you execute the DLMgetras utility from the command prompt
without specifying the folder to which collected information is output, or if
the DLMgetras utility is executed from the Windows Start menu, the
default for the folder to which collected information is output is Windows-
installation-destination-drive\hdlmtemp\hdlmgetras_nn, where nn
is a number from 00 to 99.
#2
The underlined part indicates the folder specified during installation
#3
In Windows Server 2008 or Windows Server 2012, files residing in
%SystemRoot%\inf\ are also acquired.
#4
You can obtain these files only in Windows Server 2008 or Windows
Server 2012.
#5
The value N depends on the setting in the dlmwebagent.properties file.
The default value is 2.
#6
M.N indicates the version of VxVM, or of Veritas Storage Foundation for
Windows including the VxVM. For example, 5.0 indicates Veritas Storage
Foundation for Windows 5.0.
#7
For Windows Server 2003 (excluding the x86 edition), Windows Server
2008 (excluding the x86 edition), or Windows Server 2012, Program
Files is Program Files (x86).
#8
File names are created by using the value in the Hitachi Network
Objectplaza Trace Library utility's Output (directory and prefix),
adding 2 onto the end, and then adding a file number onto the end of
that. The default file names range from hntr21.log to hntr216.log.
Utility Reference
7-9
Hitachi Dynamic Link Manager User Guide for Windows
®