Hitachi Dynamic Link Manager Software Users Guide for Windows (7.6)

KAPL12402-W iLU(0100) is in a multi-path configuration.
PathID = 0,3
KAPL12402-W iLU(0101) is in a multi-path configuration.
PathID = 1,4
KAPL12402-W iLU(0102) is in a multi-path configuration.
PathID = 5,2
PROMPT>
In the following example, the view operation is performed when the
utility determines that the system is in a multi-path configuration. For
details about the view operation, see
view (Displays Information) on
page 6-32.
PROMPT>dlnkmgr view -path -c
Paths:000006 OnlinePaths:000006
PathStatus IO-Count IO-Errors
Online 152579 30
PathID DskName iLU CP
Status Type
000000 HITACHI .DF600F .5455 0100 0C
Online Own
000001 HITACHI .DF600F .5455 0101 0C
Online Own
000002 HITACHI .DF600F .5455 0102 0C
Online Non
000003 HITACHI .DF600F .5455 0100 1C
Online Non
000004 HITACHI .DF600F .5455 0101 1C
Online Non
000005 HITACHI .DF600F .5455 0102 1C
Online Own
KAPL01001-I The HDLM command completed normally. Operation
name = view, completion time = yyyy/mm/dd hh:mm:ss
PROMPT>
-h
Displays the format of the dlmchkpath utility.
If you do not specify any parameters, a warning message will appear.
The dlmhostinfo Utility for Checking HDLM Installation
Information
This utility either displays HDLM installation information from the command
prompt or outputs the information to a file. Installation information refers to
the installation directory and the version. If HDLM has not been installed, no
installation information is output.
This utility is in the following locations:
HDLM-installation-folder\bin
and
Utility Reference
7-15
Hitachi Dynamic Link Manager User Guide for Windows
®