Hitachi Dynamic Link Manager Software Users Guide for Windows (7.6)

Key name
#1
Description
#2
Necessity of
definition
Maximu
m
charact
er
length
#
3
New
installat
ion
Upgrade
installat
ion or
Re-
installat
ion
trace_file_numbe
r
Specify the maximum number of
trace files (hdlmtr[1-64].log).
You can specify a value from 2 to
64. The default is 4.
Optional Optional 2
path_health_chec
k
Specify whether to enable path
health checking by specifying
either of the following values:
on: Enable path health checking
(default).
off: Disable path health checking.
Optional Optional 3
path_health_chec
k_interval
Specify, in minutes, the interval at
which the path health check will be
performed.
You can specify a value from 1 to
1440. The default is 30.
Optional Optional 4
auto_failback
Specify whether to enable
automatic failbacks for failed paths
by specifying either of the
following values:
on: Enable automatic failback
(default).
off: Disable automatic failback.
Optional Optional 3
auto_failback_in
terval
Specify, in minutes, the path
status check interval, which is the
interval between the end of the
previous check and the start of the
next check.
You can specify a value from 1 to
1440. The default is 1.
Optional Optional 4
intermittent_err
or_monitor
#4 #5
Specify whether to enable
intermittent error monitoring by
specifying either of the following
values:
on: Enable intermittent error
monitoring.
off: Disable intermittent error
monitoring (default).
Optional Optional 3
intermittent_err
or_monitor_inter
val
#5
Specify, in minutes, the
intermittent error monitoring
interval.
Optional Optional 4
7-24
Utility Reference
Hitachi Dynamic Link Manager User Guide for Windows
®