Hitachi Dynamic Link Manager Software Users Guide for Windows (7.6)

load_balance_type=exlio
load_balance_same_path_use_times=1
lbex_usetimes_limit=100
error_log_level=3
error_log_size=9900
error_log_number=2
trace_level=0
trace_file_size=1000
trace_file_number=4
path_health_check=on
path_health_check_interval=30
auto_failback=on
auto_failback_interval=1
intermittent_error_monitor=off
#intermittent_error_monitor_interval=30
#intermittent_error_monitor_number=3
dynamic_io_path_control=off
dynamic_io_path_control_interval=10
remove_lu=off
remove_lu_force=off
Note:
¢
If a hash mark (#) is placed at the beginning of a line in the
installation-information settings file, that line is assumed to be a
comment.
¢
If you do not want to specify a key or setting value, enter a hash
mark (#) at the beginning of that particular line.
About the Log File
During an unattended installation, information about the installation progress
is output to the log file named installhdlm.log.
The following explains the installhdlm.log file:
• The installhdlm.log file is created in the folder specified by the
workdir key in the installation-information settings file.
• If the installhdlm.log file already exists, log data will be appended to
the file. For details about the capacity of the log output folder, see
Preparations for Installing HDLM by Performing an Unattended Installation
on page 3-27.
Notes:
• The installhdlm.log file is not deleted when HDLM is removed. If the
file is no longer necessary, delete it manually.
• Creation of the installhdlm.log file might fail if, for example, the disk
does not have sufficient unused capacity. If this happens, a message will
be output immediately before the installhdlm utility terminates.
Utility Reference
7-27
Hitachi Dynamic Link Manager User Guide for Windows
®