Hitachi Dynamic Link Manager Software Users Guide for Windows (7.6)

Message ID Message Text Explanation
For details on the view operation,
see view (Displays Information)
on page 6-32.
KAPL01063-I The target path(s) are already
aa...aa.
Details
As a result of a previous online/
offline operation, the specified
path has already been set to
Online/Online(S)/Online(D)/
Offline(C).
aa...aa: Online, Online(S),
Online(D) or Offline(C)
Action
Use the view operation of the
HDLM command (dlnkmgr) to
check the status of the path. For
details on the view operation, see
view (Displays Information) on
page 6-32. For details on the
online operation, see online
(Places Paths Online) on page
6-11. For details on the offline
operation, see offline (Places
Paths Offline) on page 6-6.
For Online(S) or Online(D)
paths:
To change the status of a path
from Online(S) or Online(D) to
Online, re-execute the HDLM
command using the -hapath
parameter.
KAPL01064-W The information for the specified
host device could not be
acquired. Operation name =
aa...aa
Details
The host device specified in view
-path -hdev cannot currently be
accessed.
aa...aa: view
Action
¢
If the specified host device is
being formatted, retry after
the formatting finishes.
¢
If all the paths to the
specified host device contain
an error, recover them from
the path errors, and then
retry.
¢
In a cluster configuration, if
the LU existing for the
specified host device is
exclusively used by another
host, or if the specified host
device is allocated to a
dynamic disk volume, you
8-16
Messages
Hitachi Dynamic Link Manager User Guide for Windows
®