Hitachi Dynamic Link Manager Software Users Guide for Windows (7.6)

Message ID Message Text Explanation
If you want to execute the online
processing for the paths which
pass the specified target, enter y.
If you want to terminate the
processing, enter n.
KAPL01106-W One or more connected storage
system cannot use the load
balancing function.
Action
None.
KAPL01107-I The load balancing type
specified for individual LUs will
become invalid when this
operation is executed. Do you
want to execute the operation
anyway? Operation name = set
[y/n]:
Action
If you want to change the load
balancing algorithm for the
system, enter y. If you want to
terminate processing, enter n.
KAPL01112-E An attempt to connect to the
HDLM driver has failed.
Operation name = aa...aa
Details
HDLM driver information must be
collected to execute the given
HDLM command, but the HDLM
driver cannot be accessed.
aa...aa: clear, offline, online,
set, or view
Action
Execute the DLMgetras utility for
collecting HDLM error information,
and then contact your HDLM
vendor or maintenance company
if there is a maintenance contract
for HDLM. For details on the
DLMgetras utility, see
The
DLMgetras Utility for Collecting
HDLM Error Information on page
7-2.
KAPL01114-W The audit log configuration file
does not exist. Execute the
"dlnkmgr view -sys -audlog"
command and check the setting.
Details
The audit log configuration file
does not exist.
Action
Execute the dlnkmgr view -sys
-audlog command, and then
specify the desired setting by
using the dlnkmgr set -audlog
command.
KAPL01115-W The audit log configuration file
cannot be opened. Execute the
"dlnkmgr view -sys -audlog"
command and check whether a
normal result is displayed.
Details
The audit log configuration file
cannot be opened.
Action
If the dlnkmgr view -sys -
audlog command does not display
a normal result, contact your
HDLM vendor or maintenance
Messages
8-23
Hitachi Dynamic Link Manager User Guide for Windows
®