Hitachi Dynamic Link Manager Software Users Guide for Windows (7.6)

Message ID Message Text Explanation
To execute online processing,
enter y. To cancel the operation,
enter n. Before you execute the
processing, you must check the
path status by executing the view
operation of the HDLM command
dlnkmgr.
KAPL01170-I All Online(S) or Online(D)
paths that are connected to the
LU that has the specified path
ID will be set to Online. Is this
OK? [y/n]:
Details
All paths in the Online(S) or
Online(D) status for each
specified LU will be set to Online.
To continue, enter y. To cancel
the operation, enter n.
Action
To set to online the all Online(S)
or Online(D) paths that are
connected to the specified LU with
path ID, enter y. To cancel the
operation, enter n.
KAPL01171-I The target paths are already
aa...aa or bb...bb.
Details
The specified paths are already in
the Online, Online(S), or
Online(D) status as a result of an
online operation.
aa...aa: Online or Online(S)
bb...bb: Online(D) or Online(S)/
Online(D)
Action
Check path status by using the
view operation. For Online(S) or
Online(D) paths: To change the
status of a path from Online(S)
or Online(D) to Online, re-
execute the HDLM command with
the -hapath parameter specified.
KAPL01172-I There are no Online(S)/
Online(D) paths among the
target paths.
Details
An online operation was executed
using the -hapath parameter, but
there are no paths with the
Online(S)/Online(D) status
among the specified paths.
Action
Use the view operation of the
HDLM command (dlnkmgr) to
check the status of the path.
Messages
8-29
Hitachi Dynamic Link Manager User Guide for Windows
®