Hitachi Dynamic Link Manager Software Users Guide for Windows (7.6)

Message ID Message Text Explanation
aa...aa: The version of the SP to
be installed
bb...bb: The HDLM or SP version
that has already been installed
Action
You do not have to install the SP.
Keep using HDLM as is.
KAPL10001 to KAPL11000
Message ID Message Text Explanation
KAPL10002-W Too many parameters have
been specified.
Details
Four or more parameters have
been specified.
Action
Check the parameters of the
DLMgetras utility for collecting
HDLM error information, and then
retry. For details on the
DLMgetras utility, see
The
DLMgetras Utility for Collecting
HDLM Error Information on page
7-2.
KAPL10003-W The first parameter has not
been set to a directory. Value =
aa...aa
Details
The first parameter must be a
folder to which collected
information will be output.
aa...aa: First parameter
Action
Check the parameters of the
DLMgetras utility for collecting
HDLM error information, and then
retry. For details on the
DLMgetras utility, see
The
DLMgetras Utility for Collecting
HDLM Error Information on page
7-2.
KAPL10004-W The parameter contains an
incorrect value. Value = aa...aa
Details
The first parameter must be a
folder.
aa...aa: Invalid parameter
Action
Check the parameters of the
DLMgetras utility for collecting
HDLM error information, and then
retry. For details on the
DLMgetras utility, see
The
8-86
Messages
Hitachi Dynamic Link Manager User Guide for Windows
®