Hitachi Dynamic Link Manager Software Users Guide for Windows (7.6)

Message ID Message Text Explanation
vendor or the maintenance
company if there is a maintenance
contract for HDLM.
If the WMI repository is corrupted,
consider rebuilding the repository.
KAPL12401-I All LUs managed by HDLM are in
a single path configuration.
Details
This message is displayed when
the number of LUs managed by
HDLM is 0.
Action
None.
KAPL12402-W iLU (aa...aa) is in a multi-path
configuration. PathID =
bb...bb[,cc...cc]...
Details
The LU for the LU number in the
message is not in a single path
configuration.
aa...aa: LU number
bb...bb,cc...cc: Path ID of the
path connected to the LU
Action
Before performing remove,
upgrade installation, or re-
installation, change all the LUs to
a single path configuration.
KAPL12403-W A necessary parameter has not
been specified.
Action
Execute the dlmchkpath utility for
checking HDLM paths with the -h
parameter to check the
parameter, and then retry. For
details on the dlmchkpath utility,
see
The dlmchkpath Utility for
Checking HDLM Paths on page
7-14.
KAPL12404-W A parameter is invalid.
Parameter = aa...aa
Details
aa...aa: Specified parameter
Action
Execute the dlmchkpath utility for
checking HDLM paths with the -h
parameter to check the
parameter, and then retry. For
details on the dlmchkpath utility,
see
The dlmchkpath Utility for
Checking HDLM Paths on page
7-14.
KAPL12405-E Cannot execute the utility for
checking HDLM paths due to
insufficient memory.
Details
Not enough memory could be
allocated for the dlmchkpath
utility for checking HDLM paths.
Action
8-104
Messages
Hitachi Dynamic Link Manager User Guide for Windows
®