Hitachi Dynamic Link Manager Software Users Guide for Windows (7.6)

Supported storage
systems
#1
Interf
ace
OS
Windows Server
2003
Windows Server
2008
Wind
ows
Serve
r
2012
x86 IPF x64 x86 IPF x64 x64
• XP20000
• XP24000
FC I/F Y Y Y Y Y Y Y
Lightning 9900 series FC I/F Y Y Y -- -- -- --
Lightning 9900V series FC I/F Y Y Y Y Y Y --
iSCSI
I/F
Y Y Y -- -- -- --
• SVS
• XP10000
• XP12000
FC I/F Y Y Y Y Y Y --
Thunder 9500V series FC I/F Y Y Y Y Y Y --
Legend:
Y: Usable
--: Not usable
FC I/F: FC Interface
iSCSI I/F: iSCSI Interface
#1
Dual controller configuration is required.
#2
The evaluation of EMC DMX3000 has been completed. Response to
inquiries for other systems of the EMC DMX series must be the same as
that of the EMC DMX3000. When using systems of the EMC DMX series
other than the EMC DMX3000, evaluate the connection in advance.
#3
SP1 or later must be installed.
#4
The evaluation of EMC CX700 has been completed. Response to inquiries
for other systems of the EMC CX series must be the same as that of the
EMC CX700. When using systems of the EMC CX series other than the
EMC CX700, evaluate the connection in advance.
Note that, for Windows Server 2003, EMC CX700 was used for
evaluations. For Windows Server 2008, EMC CX3-10 was used.
#5
The evaluation of HP EVA8000 has been completed. Response to inquiries
for other systems of the HP EVA series must be the same as that of the
Creating an HDLM Environment
3-5
Hitachi Dynamic Link Manager User Guide for Windows
®