Hitachi Dynamic Link Manager Software Users Guide for Windows (7.6)

(5 x number-of-connected paths) seconds
• If installation of HDLM terminates abnormally and the KAPL09016-E
message is output, check whether an HDLM version from another OS has
been installed on the same drive.
¢
When an HDLM version from another OS has been installed:
Remove the version of HDLM that is already installed, and then rerun
the installation program.
¢
When HDLM for another OS has not been installed:
Perform the installation again by following the procedure below:
a. From Explorer, in the Tools menu, choose Folder Options.
The Folder Options window is displayed.
b. Click the View tab, and in the Advanced settings field, under
Hidden files and folders, select Show hidden files and folders.
c. Delete the following folder:
OS-installation-drive:\Program Files#\InstallShield
\InstallationInformation\
{DFF378A1-240E-11D5-8A43-0000E2382F13}
#
For Windows Server 2003 (excluding the x86 edition) , Windows
Server 2008 (excluding the x86 edition) or Windows Server 2012,
Program Files is Program Files (x86).
d. Restore the setting for Show hidden files and folders that you
changed in step b.
e. Rerun the HDLM installation program.
• When installing HDLM on a host where a Device Manager agent 5.0 or
later is installed, do not execute any of the following Device Manager
agent commands during the installation of HDLM:
hbsasrv, HiScan, hdvmagt_account, hdvmagt_schedule, hldutil, TIC
• If you want to install only the HDLM Core components, perform an
unattended installation of HDLM. For details about how to perform an
unattended installation, see
The installhdlm Utility for Installing HDLM on
page 7-17.
• After all HDLM components have been installed on a host, if you want to
create a configuration that uses only the HDLM Core components, you
cannot do so by performing an upgrade installation or re-installation. To
re-configure HDLM with only the HDLM Core components, first remove
HDLM, and then perform an unattended new installation of HDLM.
• If you want to link HDLM to other Hitachi Command Suite products, you
need to install all the HDLM components, not just the HDLM Core
components.
• In Windows Server 2003 SP1 or later, if you change an HDLM
management-target device during an upgrade installation and then
restart the host, the KAPL08019-E and KAPL08022-E messages might be
output, and the path status might change to Offline(E) or Online(E). If
3-24
Creating an HDLM Environment
Hitachi Dynamic Link Manager User Guide for Windows
®