Hitachi Dynamic Link Manager Software Users Guide for Windows (7.6)

Performing a New Installation of HDLM on Windows Server 2003
In a Non-Cluster Environment
Before installing HDLM, have a license key ready.
If you want to perform an unattended installation, also be sure to prepare an
installation-information settings file.
To install HDLM on a host that does not currently have HDLM installed
on it:
1. Log on to Windows as a member of the Administrators group.
2. Save the license key file directly under the Windows installation-
destination drive.
installation-drive:\hdlm_license
The license key file will be deleted after the installation finishes.
3. Perform the installation.
¢
If you are not performing an unattended installation, insert the DVD
into the drive.
In the displayed window, click the Install button next to for
Windows of Hitachi Dynamic Link Manager Software.
If no window is displayed, manually run the installer (setup.exe).
The program checks whether HDLM has already been installed. If
HDLM 5.4 or earlier has been installed, the KAPL09129-E message will
appear. If this happens, carry out the procedure shown in
Migrating
from HDLM 5.4 or Earlier to HDLM 5.5 or Later on page 3-65. If
HDLM 5.5 or later has been installed, the KAPL09173-W message will
appear. If this happens, carry out the procedure shown in
Upgrade
Installation or Re-installation of HDLM on page 3-64. If no message
appears, go to step 4.
¢
If you are planning to perform an unattended installation, execute the
installhdlm utility.
At the command prompt, execute the following command:
drive-to-which-the-installation-DVD-is-inserted:\HDLM_Windows
\DLMTools\installhdlm -f installation-information-settings-
file
This command checks whether HDLM has already been installed. If
HDLM 5.4 or earlier has been installed, the KAPL09129-E message will
appear. If this happens, carry out the procedure shown in
Migrating
from HDLM 5.4 or Earlier to HDLM 5.5 or Later on page 3-65. If
HDLM 5.5 or later has been installed, the KAPL09183-E message will
appear, and then the upgrade installation or re-installation will be
performed.
If you have specified n for the restart key in the installation-
information settings file, go to step 11.
Creating an HDLM Environment
3-29
Hitachi Dynamic Link Manager User Guide for Windows
®