HP P9000 Tiered Storage Manager Software 7.2 CLI Reference Guide

DescriptionItem
Shredding pattern. This can be any of the following:
• ZERO-ONCE: The data 0 is written only once
• DoD: The DoD standard method is used
shreddingMethod
The target migration group name of a volume whose shredding has been completed
moveToMigration-
GroupName
The total capacity of the volumes subject to shredding in the migration group (units:
GB). Values of less than 1 GB are rounded down to an integer. (For example, 4.5
GB is rounded down to 4 GB.)
totalShreddingCapa-
cityInGB
Event notification address
notifyToURL
The description of the task
description
Legend:
[ ]: Indicates output only when either the -d or the --detail option is specified.
The output items described in Table 68 and Table 69 below are output only if the -d or --detail
option is specified.
Table 68 Items output by the GetTasks command (shredding task) (ErrorInfo instance)
DescriptionItem
Error message
message
Table 69 Items output by the GetTasks command (shredding task) (ShreddingInfo instance)
DescriptionItem
Controller logical device number of the volume.
The number is displayed as a value that is a combination of hexadecimal values
and colons (:).
controllerDevi-
ceNumber
The serial number of the storage system that stores the actual volume data
subsystemSerialNum-
ber
The display name for the model of the storage system that stores the actual volume
data. If the displayed model name is unknown, the product name will be displayed.
subsystemDisplay-
Model
The name of the storage system that stores the actual volume data. If the storage
system name is unknown, the product name and serial number will be displayed.
subsystemName
The LDEV number of the LU in the storage system that stores the actual volume data.
The number is displayed as a decimal number or a value that is a combination of
hexadecimal values and colons (:).
subsystemDeviceNum-
ber
The logical device ID of the LU in the storage system that stores the actual volume
data.
For the HP storage system, - is displayed.
subsystemDeviceID
The capacity of the volume (units: KB)
capacityInKB
Details of CLI commands132