HP P9000 Tiered Storage Manager Software 7.2 CLI Reference Guide

Specify true to use SSL communication. If you do not want to use SSL communication, specify a
value other than true or nothing.
For details about the settings for using SSL communication, see “Setting up SSL
communication” on page 26.
parameter.parameter-name property
This property specifies the value of a command parameter. Values specified here are applied to all
commands.
For details about how to specify the value of each command parameter, see “Command
parameters” on page 34, and the details about each command.
Specifying properties for the trace log in the
htsmclienv.properties file
Values for CLI log output functions can be set in the htsmclienv.properties file.
NOTE:
Note the following about the characters that can be specified in the htsmclienv.properties
file:
• Only printable characters, (that is ASCII characters and \u0020 - \u007E (which are recognized
as ASCII characters)) can be used for property values.
• Property names are case sensitive.
The following table lists examples of CLI log information output settings in the
htsmclienv.properties file.
Table 89 Example property value settings in the htsmclienv.properties file
ValueProperty
20logger.tracelogLevel
5logger.fileCount
3MBlogger.maxFileSize
Absolute path:
C:\\TieredStorageManager\\
Tiered-Storage-Manager-version\\CLI\\logs\\
HTSMCLITrace
Relative path:
logs\\HTSMCLITrace
logger.filePath
The following shows an example of the above properties and values.
logger.tracelogLevel=20
CLI Reference Guide 177