HP P9000 Tiered Storage Manager Software 7.2 CLI Reference Guide

DescriptionItem
The cost of normal volumes is displayed in the following format:
currency-code amount / unit-of-capacity / period
If this item is not set, nothing is displayed.
cost
The charge target for normal volumes.
• Allocated: The volume capacity allocated to the host
• Utilized: The volume capacity actually used by the host
If this item is not set, nothing is displayed.
chargefor
The cost of THP volumes is displayed in the following format:
currency-code amount / unit-of-capacity / period
If this item is not set, nothing is displayed.
thpcost
The charge target for THP volumes.
• Allocated: The THP volume capacity allocated to the host
• Consumed: The THP volume capacity that has already been consumed
• Utilized: The THP volume capacity actually used by the host
If this item is not set, nothing is displayed.
thpchargefor
Legend:
[ ]: Indicates output only when either the -d or the --detailoption is specified.
Example and execution results
• Command execution example:
In this example, detailed information is obtained for both the MegaTech-HighCost and Stor-
ageTier-1 storage tiers, in the MegaTechXP12000-Primary storage domain.
htsmcli GetStorageTiers --detail
storagedomainname="MegaTechXP12000-Primary"
name="MegaTech-HighCost,StorageTier-1"
• Execution results:
RESPONSE:
An instance of StorageDomain(1 of 1)
name=MegaTechXP12000-Primary
List of 2 StorageTier elements:
An instance of StorageTier(1 of 2)
name=MegaTech-HighCost
filterCondition=RAIDLevel = 'RAID5(3D+1P)' AND Capacity < '1GB'
numberOfVolumes=91
totalCapacityInGB=387
totalCapacityPercentageToStorageDomain=5
usedCapacityInGB=29
usedCapacityPercentage=8
freeCapacityInGB=358
freeCapacityPercentage=92
numberOfManagedVolumes=25
CLI Reference Guide 69