HP StorageWorks Disk Array XP operating system configuration guide: SGI IRIX (A5951-96075, December 2005)

Example
# fx -x "dksc( 8,0 ,2)"
fx version 6.5, Jan 11, 2000
...openin g dksc(
8,0,2)
...drive sel ftest...OK
fx: Warning: inval id label from disk driver, ignored
Scsi drive type =
= HITACHI OPEN-3-CVS 5244
...creati ng default bootinf o
...create d default partitio ns, use /repartition menu to change
...creati ng default volume directory
----- please choose one (? for h elp, .. to quit this menu)-----
[exi]t [d]ebug/ [l]abel/ [a ]uto
[b]adbloc k/ [
exe]rcise / [r]epartition/
Set the device parameters. fx> / label/set/param
fx/label/ set /parameters: Er ror correction = (enabled)
fx/label/ se
t/parame ter s: Data transfer on error = (enabled)
fx/label/ set /parameters: Re port recovered errors = (enabled)
fx/label/ set /parameters: De lay for error rec ove ry = (enabled)
fx/label/ set /parameters: Er r retry count = (0)
fx/label/ s
et/parame ter s: Transfer of bad data blocks = (dis abl ed)
fx/label/ set /parameters: Au to bad block realloc ation (write)
= (enabled)
fx/label/
set/parame ter s: Auto bad block reallocation (rea d)
= (enabled)
fx/label/ set /parameters: Re ad ahead caching = (enabled)
fx/label
/set/para me ters: Write buffering = (enabled)
fx/label/ set /parameters: Dr ive disable prefetch = (0)
fx/label/ set /parameters: Dr ive minimum prefetch = (0)
fx/label/ set /parameters: Dr ive maximum prefetch = (0)
fx/labe
l/set/para me ters: Drive prefetch ceiling = (0)
Enter enable . fx/label/set/parameters: Ena ble CTQ = (disabled) enable
Enter desire d queue depth. fx/la bel/set/para met ers: CTQ depth
=(2)8
fx/label/ set /parameters: Re ad buffer ratio = (0/256)
fx/label/ set /parameters: Wr ite buffer ratio = (0/256)
*****W
ARNING*****
Enter yes. about to modify drive parameters on di sk dksc(8,0,2)!
ok? yes
-----
please choo se one (? for help, .. to quit this menu)-----
[exi]t [d]ebug/ [l]abel/ [a ]uto
[b]adbloc k/ [exe]rcise / [r]epartition/
Exit
the fx utility. fx> exi
Enter yes. label info has changed for disk dksc (8,0,2). write ou t
cha
nges? (yes) yes
Disk Array XP operating system configuration guide: SGI I RIX
31