HP StorageWorks Disk Array XP operating system configuration guide: SGI IRIX (A5951-96075, December 2005)

4. When you a re finished adding the new file systems to the mount table, save the
changes and exit the vi editor.
5. Verify that the new file systems are registered correctly; enter:
df
Example
#df
File system Type blocks use avail %use M ounted on
/dev/root xfs 1852624 103 8184 814440 57 /
/dev/dsk/ dks
4d4s7 efs 4659286 2 4193354 0 /HP5700_LU0
/dev/dsk/ dks
4d4l1s7 efs 4 659286 2 4193354 0 /HP5700_LU1
/dev/dsk/ dks 4d4l2s7 e fs 4659286 2 4193354 0 /HP5700_LU2
/dev/dsk/ dks 4d4l3s7 e fs 4659286 2 4193354 0 /HP5700_LU3
:
:
#
Thedefaultdisplayfordrivecapacityis512-byteblocks. Toviewthecapacityof
the drives in k ilobytes rather than in 512-byte blocks, enter:
df –k
Example
#df-k
File syst
em Type Kbyte s use avail %use Mounted on
/dev/root xfs 969857 41 4702 5551 55 43% /
/dev/dsk/ dks 8d0l13s0 xfs 1048576 13 1048563 0% /HP570 0-LU00
#
To mount and ve
rify the new file systems:
1. Mount all registered file systems; enter:
# mount –a
2. To verify the op eration of each new filesystem,gotothemountdirectoryforthe
file system to be verified.
Example
# cd /HP5700_LU0
3. Copy any file to the mount directory.
Example
# cp /unix.backup1 /HP5700_LU0/unix.back1
Disk Array XP operating system configuration guide: SGI I RIX
35