HP StorageWorks Disk Array XP operating system configuration guide: SGI IRIX (A5951-96075, December 2005)

Error Condition Recommended Action
Physical volumes cannot be created.
Verify that the disk array logical devices are
correctly formatted.
Logical volumes cannot be created.
Verify that the vo
lume capacity for OPEN-x volumes
is not greater tha
n the maximum capacity allowed.
See the Device Em
ulations Appendix.
Verify tha t the c
apacity of the volume group is not
less than the total capacity of the partitioned logical
volume.
A file system is not m ounted after rebooting. Verify tha t the host was restarted correctly.
Verify that the file system attributes are correct.
The disk array performs a self reboot because
the disk array was busy or it logged a panic
message.
Reboot the host.
The disk arra
y responds “Not Ready” or the
disk array ha
s displayed “Not Ready” and
timed out.
Contact HP.
Thehostdetectsaparityerror. ChecktheHBAandmakesureitwasinstalled
properly.Reboot the host.
The host hangs or devices are declared and
the host hangs.
Make sure there are no duplicate disk array TIDs
and that disk array TIDs do not conflict with any
host TIDs.
38
Troubleshooting