HP StorageWorks XP Disk Array Configuration Guide for NonStop XP24000, XP20000, XP12000, XP10000, XP1024, XP128 (A5951 - 96223, September 2007)

1 Installing and configuring NonStop for
the XP disk array
You and your HP service representative each play a role in installation. Your HP service representative
is responsible for installing the disk array and formatting the disk devices. You are responsible for
configuring the host server for the new devices with assistance from your HP service representative.
The HP NonStop operating system runs on HP S-series and Integrity NonStop servers to provide
continuous availability for applications, databases, and devices. The NonStop OS and servers support
high transaction volumes and complex mixed workloads. An open application development environment
supports common standards, including Java, CORBA, SQL, OBDC, JDBC, HTTP, TCP/IP, and
application programming interfaces.
Features and requirements
Ask your HP service representative about the latest supported hardware and software.
The disk array has the following features:
• Storage capacity. The storage capacity for each model is listed below:
XP128: From 8 to 128 drives for up to 36 TB, 48 FC ports
XP1024: From 8 to 1024 drives for up to 149 TB, 64 FC ports
XP10000: Up to 240 drives for up to 69.2 TB, 48 FC ports
XP12000: Up to 1152 drives for up to 332 TB, 128 FC ports
XP20000: Up to 240 drives for up to 69.2 TB, 48 FC ports
XP24000: Up to 1152 drives for up to 332 TB, 256 FC ports
• Server support: HP S-series and Integrity NonStop servers
• Operating system support: Check with your HP representative for the current OS versions supported
by your XP disk array
Before installing the disk array, ensure the environment conforms to these requirements:
• Fibre Channel ServerNet Adapters (FCSAs): Install FCSAs and all utilities and drivers. Refer to the
FCSA documentation for installation details.
• (Recommended) HP StorageWorks XP Remote Web Console, HP StorageWorks XP Command
View Advanced Edition Software or HP StorageWorks XP Command View with LUN management
feature for configuring disk array ports and paths
• (Recommended) HP StorageWorks XP Array Manager
• (Optional) Check with your HP representative for other XP software available for your system.
Fibre Channel interface
The XP family of disk arrays supports these Fibre Channel elements:
• Connection speeds of 1 Gbps, 2 Gbps, and 4 Gbps
XP Disk Array Configuration Guide for NonStop 11