HP StorageWorks XP Disk Array Configuration Guide for NonStop XP24000, XP20000, XP12000, XP10000, XP1024, XP128 (A5951 - 96223, September 2007)

HP XP storage systems use the following values to calculate logical storage capacity values (logical

devices):

• 1 KB (kilobyte) = 1,024 bytes

•

1 MB (megabyte) = 1,024

bytes

•

1 GB (gigabyte) = 1,024

bytes

•

1 TB (terabyte) = 1,024

bytes

• 1 block = 512 bytes

Graphical interface illustrations

The GUI illustrations in this guide were created using a Windows computer with the Internet Explorer

browser. Actual windows may differ depending on the operating system and browser used. GUI

contents also vary with licensed program products, storage system models, and firmware versions.

HP technical support

For worldwide technical support information, see the HP support website:

http://www.hp.com/support

Before contacting HP, collect the following information:

• Product model names and numbers

• Technical support registration number (if applicable)

• Product serial numbers

• Error messages

• Operating system type and revision level

• Detailed questions

Subscription service

HP recommends that you register your product at the Subscriber's Choice for Business website:

http://www.hp.com/go/e-updates

After registering, you will receive e-mail notification of product enhancements, new driver versions,

firmware updates, and other product resources.

HP websites

For additional information, see the following HP websites:

•http://www.hp.com

•http://www.hp.com/go/storage

•http://www.hp.com/service_locator

•http://www.hp.com/support/manuals

XP Disk Array Configuration Guide for NonStop 9