HP StorageWorks Disk Array XP operating system configuration guide for Tru64 UNIX XP24000, XP12000, XP10000, v01 (A5951-96066, June 2007)

Figure 1 SNMP configuration
XP RAID Manager command devices
HP StorageWorks XP RAID Manager manages HP StorageWorks XP Business Copy Software or HP
StorageWorks XP Continuous Access Software operations from a host server. To use XP RAID Manager
with XP Business Copy Software or XP Continuous Access Software, you use XP Remote Web Console
or XP Command View, to designate at least one LDEV as a command device. Refer to the applicable
user's guide for information about how to designate a command device.
Installation roadmap
Perform these actions to install and configure the disk array:
1. Installing and configuring the disk array
• Setting the host mode for the disk array ports
• Setting the System Option Modes
• Configuring the Fibre Channel ports
2. Installing and configuring the host
• Loading the operating system and software
• Installing and configuring the HBAs
• Setting up clustering and fabric zoning
• Fabric zoning and LUN security for multiple operating systems
3. Connecting the disk array
• Defining the paths
• Verifying host recognition of disk array devices
4. Configuring disk devices
• Writing the partition labels
• Creating the file systems
• Creating mount directories
• Mounting the file systems
• Verifying the file systems
• Setting and verifying automatic mounting at bootup
Installing and configuring the disk array
The HP service representative performs these tasks:
XP Disk Array Configuration Guide for Tru64 UNIX 13