HP StorageWorks XP24000 SNMP Agent Reference Guide, v01 (AE131-96006, June 2007)

Figure 6 Delete IP Address Pop-Up Menu
Adding a Com
munity Name
To add a community name:
1. Change to Modify mode.
2. Log on to Remote Web Console.Click Go – Environmental Settings – SNMP Information in the
menu bar of Remote Web Console Main window. The SNMP Information window is displayed
(see Figu
re 4
on page 15) .
3. In Community &Trap box, select and right-click Community. Add Community pop-up menu
displays (see Figure 7 on page 1 9).
4.
Select Add Community . Comm unit y dialog box (see Figure 8 on page 20) displays.
5. In the Community text box, enter desired community name. You can use up to 180 alphanumeric
charact
ers, except for ", \, ;, :, ,, *, ?, <, >, |, /, ^, &,and %. You can also use spaces,
except at the beginning or the end of the name.
6. Select OK. The new community na me displays in Community & Trap, but the changes are not
yet imp
lemented in the subsystem.
7. To add one or more IP addresses to the new community, see
“Adding Community IP Addresses” on page 21.
8. To appl
y
changes, select Apply.Select OK or Cancel.
Figure 7 Add Commun ity Pop-Up Menu
XP24000 SNMP Agent Reference Guide
19