HP StorageWorks XP24000 SNMP Agent Reference Guide, v01 (AE131-96006, June 2007)

Table 9 Failure Report Trap
Name
Object Identifier
Type
Description
EventTrapSerialNumber
1.3.6.1.4.1.116.5.11.4.2.1 INTEGER
The product number of the
device that experienced
the failure.
EventTrapNickname
1.3.6.1.4.1.116.5. 11.4.2.2
DisplayString The device nickname.
EventTrapREFCODE
1.3.6.1.4.1.116.5. 11.4.2.3
DisplayString
The failure reference (see
Table 8 on page 25).
EventTrapPartsID
1.3.6.1.4.1.116.5. 11.4.2.4
OBJECT
IDENTIFIER
The area where the failure
occurred (
Note ).
EventListDate
1.3.6.1.4.1.116.5. 11.4.2.5
DisplayString Failure occurrence date.
EventListTime
1.3.6.1.4.1.116.5. 11.4.2.6
DisplayString Failure occurrence time.
Note: For example, the object identifier for a failure in a disk controller processor would be
1.3.6.1.4.1.116.5.11.4.1.1.6.1.2.
Standard MI B Specifications
Supported MIB
Table 10 on page 26 shows the supported MIBs. If you send a GET request for an object (MIB) that is
not
supported, you will receive NoSuchName as a G ET RESPONSE.
Table 10 Supported MIBs
MIB
Supported?
Standard MIB: MIB-II
system group
Supported
interface group
Not supported
at group
Not supported
ip group
Not supported
icmp group
Not supported
tcp group
Not supported
udp group Not supported
egp group
Not supported
snmp group
Not supported
Extension MIB
Supported
MIB Access Mode
The ac cess mo d e for MIB in all com munities is read only. If you send a GET request for a SET operation,
you will receive NoSuchName as a G ET RESPONSE.
Object Identifier System
An object system supported by SNMP agent is as follows:
26
SNMP Supported MIB