Hitachi Dynamic Link Manager Software Users Guide for Linux

# /opt/DynamicLinkManager/bin/dlmmkinitrd
KAPL12329-I The utility for supporting the boot disk started.
KAPL12344-I A compressed initial ramdisk image /boot/
initrd-2.6.16.46-0.14-default.hdlm was created.
KAPL12330-I The utility for supporting the boot disk
completed.
31. When you create a new initial RAM disk image file rather than overwriting
the existing one, delete the existing initial RAM disk image file that is no
longer required.
Execute the following command:
¢
Execution example of the command when GRUB as the boot loader is
used
# rm /boot/initrd-hdlm-2.6.9-11.EL.gz
¢
Execution example of the command when IPF (with ELILO as the boot
loader) is used
# rm /boot/efi/efi/redhat/initrd-hdlm-2.6.9-11.EL.gz
32. Edit the boot loader configuration file so that the OS will start with HDLM
specified.
Edit the boot loader configuration file as shown in
Figure 4-7 Example of
Editing /etc/grub.conf file on page 4-29, Figure 4-8 Example of Editing /
boot/grub/menu.lst file (When using a kernel that supports Xen) on page
4-30, and Figure 4-9 Example of Editing /etc/elilo.conf file on page 4-31.
If you are using SUSE LINUX Enterprise Server, check the /boot/grub/
menu.lst file instead of the /etc/grub.conf file.
Examples of editing the configuration file are shown below. See the
example for the boot loader you are using.
The detailed procedure is explained in steps 28 to 32.
Figure 4-7 Example of Editing /etc/grub.conf file
Edit the shaded portion.
HDLM Operation
4-29
Hitachi Dynamic Link Manager (for Linux®) User Guide