Hitachi Dynamic Link Manager Software Users Guide for Linux

Message ID Message Text Explanation
Make sure that the disk has
enough unused capacity.
KAPL04012-E Could not create a
communication pipe. RC =
aa...aa
Details
HDLM manager could not start
normally because it was unable to
create a pipe file, which is used in
communication with HDLM
commands.
aa...aa: OS error code(decimal
(base-10) number)
Action
Execute the DLMgetras utility for
collecting HDLM error information,
and then contact your HDLM
vendor or the maintenance
company if there is a maintenance
contract for HDLM. For details on
the DLMgetras utility, see
DLMgetras Utility for Collecting
HDLM Error Information on page
7-3.
KAPL04013-E Input is impossible via the
communication pipe. RC =
aa...aa
Details
Data could not be read from the
pipe file while communicating with
an HDLM command.
aa...aa: OS error code (decimal
(base-10) number)
Action
Execute the DLMgetras utility for
collecting HDLM error information,
and then contact your HDLM
vendor or the maintenance
company if there is a maintenance
contract for HDLM. For details on
the DLMgetras utility, see
DLMgetras Utility for Collecting
HDLM Error Information on page
7-3.
KAPL04014-E Output is impossible via the
communication pipe. RC =
aa...aa
Details
Data could not be written to the
pipe file while communicating with
an HDLM command.
aa...aa: OS error code (decimal
(base-10) number)
Action
Execute the DLMgetras utility for
collecting HDLM error information,
and then contact your HDLM
vendor or the maintenance
company if there is a maintenance
contract for HDLM. For details on
8-34
Messages
Hitachi Dynamic Link Manager (for Linux®) User Guide